Veris-industries H84xx Install Instrukcja Użytkownika Pobierz pdf

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

POWER MONITORING

INSTALLATION GUIDE

H84xx

Power Meters For Use With 1V CTs

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.

• This equipment must only be installed and serviced by qualiﬁed electrical personnel.

• Read, understand and follow the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on or inside the equipment.

• Use a properly rated voltage sensing device to conﬁrm power is oﬀ.

DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION

• Only install this product on insulated conductors.

Failure to follow these instructions will result in death or serious injury.

DANGER

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classiﬁed locations.

• The installer is responsible for conformance to all applicable codes.

• Mount this product inside a suitable ﬁre and electrical enclosure.

FCC PART 15 INFORMATION

NOTE: This equipment has been tested by the manufacturer and found

to comply with the limits for a class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Modiﬁcations to this product without the express authorization of

Veris Industries nullify this statement.

QUICK INSTALL

1. Mount the device in a re/electrical enclosure. Use the retaining clips for the

H84xx-V. Use appropriate wall-mounting screws for the H84xx-VB(S).

2. Wire the device. See the Wiring Diagrams section for options.

3. Congure the communications parameters.

Installer’s Speciﬁcations

Electrical Characteristics:

Type of measurement True RMS up to the 15th harmonic. On three-phase AC system

Measurement Accuracy:

Current & Voltage ANSI C12.16, 0.5%

Power ANSI C12.16, 1%

Frequency ±-0.01 Hz from 45 to 65 Hz

Data Update Rate 1 sec

Input Voltage Characteristics:

Measured Voltage Max. UL to 600VAC (L-L); CE to 300VAC (L-N)

Metering Over-Range +20%

Impedance 2 MΩ (L-L)/ 1MΩ (L-N)

Frequency Range 45 to 65 Hz

Input Current Characteristics:

CT Scaling Primary: Adjustable from 5A to 32,767A

Measurement Input Range 0 to 1.0VAC (+20% over-range)

Impedance 100 kΩ

Control Power* AC: 100 to 415 ±10%VAC, 5VA; DC: 125 to 250 ±20%VDC, 3W

(see * for 600V option)

Control Power Ride Through Time 100 mS at 120VAC

Output:

Pulse Output #1 H8453V/VB, H8463V/VB (kWh) N.O., static output

(240VAC or 300VDC, 100mA max. at 25°C,

derate 0.56mA per °C above 25°C) 2.41kV RMS isolation

Pulse Output #2 H8453V/VB (Phase Detect or kVARh) N.O., static output

(240VAC or 300VDC, 100mA max. at 25°C,

derate 0.56mA per °C above 25°C) 2.41kV RMS isolation

Pulse Output #2 H8463V/VB (Phase Detect or kVARh) N.C., static output

(240VAC or 300VDC, 100mA max. at 25°C,

derate 0.56mA per °C above 25°C) 2.41kV RMS isolation

RS485 Port; H8436V/VB; H8437V/VB 2-wire, 2400 to 19200 baud, Modbus RTU

Mechanical Characteristics:

Weight H8400V=0.81lb; H8400VB=6.35lb; H8400VBS=9.15lb

IP Degree of Protection (IEC 60529) IP40 front display, meter body IP30 for VB

Display Characteristics Back-lit green LCD (6 lines total, 4 concurrent values)

Environmental Conditions:

Operating Temperature Meter: 0° to 60°C; Display: -10° to 50°C

Storage Temperature Meter and Display: -40° to 85°C

Humidity Range 5 to 95% RH at 50°C (non-condensing)

Metering Category:

North America CAT III; for distribution systems up to 347V L-N/600VAC L-L

CE CAT III; for distribution systems up to 300V L-N/480VAC L-L

Dielectric Withstand Per UL 508, EN61010

Conducted and Radiated Emissions FCC part 15 Class B, EN55011

Safety:

North America UL508/C22.2

Europe CE per IEC 61010

*For control voltages >415VAC order H84xxVBS

1 2 3 4 5 6 ... 28 29

Podsumowanie treści

Strona 1 - INSTALLATION GUIDE

Strona 2

Strona 3

Strona 4

Strona 5

Strona 6

Strona 7

Strona 8

Strona 9

Strona 10

Strona 11 - OPERATION

Strona 12

Strona 13

Strona 14 - &

Strona 15

Strona 16 - 25000193

Strona 17 - MENU TREES

Strona 18 - Optional

Strona 19

Strona 20

Strona 21

Strona 22

Strona 23

Strona 24

Strona 25

Strona 26

Strona 27

Strona 28

Strona 29

Komentarze do niniejszej Instrukcji

Brak uwag

Veris-industries H84xx Install Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Veris-industries H84xx Install. Veris Industries H84xx Install User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Veris-industries H84xx Install